Batch Oven vs. Conveyorized Oven

Direct answer

• Batch oven — discrete loads, mixed sizes, shorter hall.
• Aging room — walk-in soak for racks or large batched loads.
• Tunnel oven — continuous conveyorized cure or dry-off.

Heating (gas, electric or pellet-fired) is a separate choice from oven style.

Match the oven to the line

On a standard powder sequence, the oven is the Cure block after powder application. Dry-off before the booth can be a shorter oven or a dedicated dry-off zone.

If coating is conveyorized, the tunnel length is calculated from soak time and chain speed. If coating is manual, a batch oven next to the booth is often enough.

Planning checklist

1. Peak and average throughput
2. Largest part envelope
3. Available floor length
4. Whether parts hang or sit
5. Site fuel

Contact the Toronto office if you are unsure which chamber type fits the parts.